Menu

Buy online
Select Products Now Available

News

Compressor Systems for Metal Fabrication

A reliable air compressor system is the central power source for metal fabrication – it’s what keeps production moving quickly and efficiently.

Here are our solutions for your common problems to keep moving.

Source: Ingersoll Rand

Reading Time: 2min 2sec

Learn more about this news.

Different Uses of Compressed Air in the Pharmaceutical Industry

Strict requirements are applicable for compressed air because it frequently comes into direct contact with the product itself in the production process.

Here is how the compressed air quality affects production lines:

Source: Ingersoll Rand

Reading Time: 1min 29sec

Learn more about this news.

Electronics and Oil-Free Air Compressor: an Electrifying Compression Solution

Compressed air is used in the electronics industry more often than one might think. It is used for PCB cleaning after production as well as to transferring components pneumatically or operating sensitive valves.

Therefore, investing in an oil-free compressor is essential.

Source: Ingersoll Rand

Reading Time: 1min 0s

Learn more about this news.

New RBQ (Régie du bâtiment du Québec) Code for Pressure Vessel Installations

Did you know that since April 1st, 2019, a pressure vessel installation permit is required to repair, install or manufacture pressure vessel systems?

Enterprises Larry has obtained this new RBQ authorization and reaffirms its leading position in the field of compressed air systems in Quebec.

To comply with increasingly stringent industry standards and regulations, trust our certified experts.


Air Systems and Compressors for Woodshops

Air compressors are one of the most vital pieces of equipment in your woodshop. They are used for various reasons, such as running air tools or cleaning equipment. Thus, it is important to maximize their efficiency and maintain them well to avoid costly and unnecessary breakages.

Here are 3 simple ways to reduce problems that could occur, especially during this summer season.

Source: Ingersoll Rand

Reading Time: 1min 35s

Learn more about this news.

Craft Brewing : Solutions to Your Common Issues

Craft Brewing is a skill, so no matter where your craft brewing operations are heading−toward a better product, to wider distribution, or from kegs to cans−how fast you reach your goals, and how much it costs you to get there, is determined by the quality and reliability of your compression system.

Source : Ingersoll Rand

Reading Time : 2min 39s

Learn more about this news.

Schedule Equipment Maintenance Is Your Equipment Does not Schedule It For You

Here are some basic maintenance tips that may allow you to use your equipment longer.

Source : Ingersoll Rand

Reading Time : 1min 15s

Learn more about this news.

Compressed air systems for food and beverages

High quality compressed air is essential for Food & Beverage production from the compressor room down to the point of use

Source : Ingersoll Rand 

Reading Time : 1min 21s

Learn more about this news.

Acquisitions: Two new addresses

Entreprises Larry reaffirms its leading position in the air systems industry in Quebec by adding two sales and service centers with the acquisition of National Pneumatic in Granby and Service Air in Terrebonne.

Reading Time : 35s

Learn more about this news.

Topring PPS: An Innovative Compressed Air Piping System

Topring recently launched Topring S08 PPS, a brand new, complete and long-lasting compressed air piping system.

Fully made of aluminium, the new Topring PPS compressed air piping system is lightweight and corrosion resistant. It guaranties a leak-free system, easy to assemble with the lightest and most compact pipes and fittings.

For more information on this new piping system for compressed air, we invite you to watch the informative video of the manufacturer.

Source : Topring


Consumption Analysis: E-Larry’s Air Audit Service

Entreprises Larry offers an air audit service that allows our qualified engineers to perform a rigorous analysis of your company's real consumption. We will do more than just submit performance results; we will also propose solutions that work in parallel with your business needs and their impact. These improvements can act on debit, pressure, equipment installation or even machine selection.  

Our engineering group performs detailed technical analyses and uses the most precise calculation methods in the industry. You'll see in a clearly presented report how a new system would perform in your company.   

As Ingersoll Rand is doing, E-Larry offers services that help you optimize your operations to reduce energy consumption, waste and production downtime.  

Contact us to find out how E-Larry can help you improve the energy efficiency of your business.


Case Study : Ingersoll Rand | D9 Brewery - Noise Pollution

A success story: When an air compressor helps a brewer to reduce noise pollution.

See the vidéo.

To learn more about product and service offerings by E-Larry, check out Air Compressor and Systems on our website.


Compressed Air: “The Fourth Utility”

Here is a great video which explains what is compressed air – the fourth utility along with water, electricity and gas – and how it can be managed and harnessed to deliver energy-efficiency improvements in industry.

Watch the vidéo

To learn more about product and service offerings by E-Larry, check out Air Compressor and Systems on our website.
 


Working With Compressed Air

The power of compressed air is used in thousands of applications and is vital to the productivity of industries around the globe.
- It can power rotary equipment
- It drives reciprocating equipment
- It can impact, and convey
- It can atomize, spray, sand blast, agitate, and cool
- It can operate controls

The applications are endless….

Vehicle Services:
- Pneumatic tools
- Tire filling

Food and Beverage Processing
- Filling and capping
- Fermentation

Metals:
- Sandblasting
- Machining

Wood Products:
- Dust collection
- Pneumatic equipment

Read more

Source : Compressed Air & Gas Institute


Entreprises Larry will participate in Expo Grands Travaux

Entreprises Larry will participate in Expo Grands Travaux on April 27 and 28 at Montreal's Olympic Stadium.

Come and meet us at booth #5412 !

Expo Grands Travaux is one of Eastern Canada’s largest heavy equipment industry trade shows, with 300,000 square feet of exhibit space, major industry OEMs and dealers, and tons of big iron.

As you walk the show floor, you’ll find hundreds of exhibitors with cutting-edge equipment appealing to those in the trucking, snow removal, landscaping and heavy equipment industries.

Learn more


Overhauling an Air Compressor

Cost Control, Rigorous Testing and Quality Parts.

When an air compressor needs to be overhauled, you hope the experience will be as pain free as possible. There are different approaches to overhauling an air compressor, and each has different implications related to cost, parts, service and performance.

Read the full article by David Grabau, at Ingersoll Rand Compression Technologies and Services.

Source : Compress Air Best Practices


10 Steps to Savings

Here are 10 steps you can take to optimize your compressed air system and save energy costs.

1. Turn It Off.
2. Fix Existing Leaks.
3. Prevent New Leaks.
4. Reduce Pressure. Run at required pressures, not beyond.
5. Check Drains. Are your condensate drains stuck open?
6. Review Piping Infrastructure. Many systems aren't optimized.
7. Change Filters Systematically. Not every once in a while.
8. Recover Heat. Compressing air generates heat - reuse it!
9. Emphasize Proper Maintenance. Ignoring maintenance costs more.
10. Identify and Eliminate Inappropriate Uses of Compressed Air.

Learn more

Source : CAGI - Compressed Air & Gas Institute


Entreprises Larry will be attending at Objectif Nord - Événements les affaires

Entreprises Larry will be attending at Objectif Nord on September 27, 2016 at the Westin Hotel Montreal. Get 35% discount on regular prices when registering online using our customer promo code: 2LARRY

More details
Program (PDF)


Special Project

Our client, Pacon Process – a provider of Modular Customized Units –, needed compressors and their ancillary equipment to go in an open-sided roofed module. This portable module would then be used all across the USA in variable weather ranging from extreme cold temperatures to hot southern states.

Over the years, Larry Enterprises has developed “winterization” alternatives for most equipment we sell. This feature, through heat tracing and strategic insulation, allows for the equipment to be operated in harsh winter conditions. Adapting the equipment this way is cost-effective and increases the performance of the entire system. Winterized units will not only resist cold weather but actually benefit from the cold air exposure to produce cleaner quality air, better cooling  and reduce negative effects of higher temperature operation – all while remaining safely operable and avoiding freezing damage. All heating elements are thermostat controlled and are therefore automatically deactivated when the temperature increases or when the unit is placed in warmer weather.

At Larry Enterprises, we work with our partners and clients to provide solutions to the most complex needs. Our expertise and know-how make us the ideal choice for your compressed air projects. Contact us to see how we can help.


You can ring my bell...

Larry Enterprises are very proud to have actively participated in the restoration of the church bells of St-Zéphirin-de-La-Tuque. Listen to how they resonate proudly now!

https://www.youtube.com/watch?v=4PqI5vCJ7co


Enterprises Larry Inc. are proud to announce their association with their new retailer:

 

 

http://www.controlsandequipment.com/index.php

Controls and Equipment

45 Pippy Place
St. John's, NL A1B 3X2

TEL: 709.753.2048
FAX: 709.753.2303

EMAIL: info@controlsandequipment.com

 



R-Series: R37-45kW (50-60HP)

Ingersoll Rand, the world leader in developing industry-leading compressor equipment, is proud to announce the latest addition to the R-Series product line, the R37-45kW (50-60HP) Rotary Contact Cooled Screw Air Compressor.


NEW DEALER

We are pleased to announce that we are working with a new dealer.
A warm welcome to Machinerie Robert Ltd.  
 

3205, 1re Rue, Arrondissement Saint-Hubert
Longueuil, QC J3Y 8Y6
Téléphone : 514-935-3589

www.raymondrobert.com


Continued Growth

Larry Enterprises has received an Ingersoll Rand Certificate
of Excellence for 2012. Compressed air systems made by Ingersoll Rand
are at the heart of the development of our performance
and energy efficiency solutions.
 

Enlarge the certificate


Sustained growth for 20 years

Enterprise Larry was awarded  20 years of excellence serviceand growth in Quebec by Ingersall Rand. Ingersoll Rand brands along with the expertise or Enterprises Larry`s staff were the main factors for this growth.  We wanted to take the opportunity to thank the Staff and our clients who made it happen.

See document


Grand prize winners at the contest held
at the Salon des Grands Travaux

Winner - Ingersoll Rand compressor:
       - André Arguin from Thetford Mines


Winners - Impact wrenches:
***4 impact wrenches were offered as a promotion from Entreprises Larry's President***
       - Ivan McKoy from Gaspé
       -François Robert from Ange Gardien
       -François Côté from Sutton
       -Réjean Harrison from Laval
 

Congratulations to all the winners and thank you for participating! 


A SOLID PARTNERSHIP

In 2011, Ingersoll Rand awarded Les Entreprises Larry with the Certificat d'Excellence, and this confirms the solid nature of our partnership. The overall activities that we cover while offering the services expected by our clients to identify energy efficiency and performance solutions, leads to our inevitable drive to constantly innovate. Major accomplishments are in the works for 2012.

Enlarge the certificate


Minimize window

Buying
compressors
should be easy
and reassuring.

Chat with us
Chat with us
Question / Comments ?